Use Your Canon Printer Regularly to Avoid Print Head Clogging
The printheads in your printer
machine are the source for supplying ink to the paper. When these things get
clogged with the bits of paper or with dried ink then you might see uneven and
streaked ink supply in the printed materials and thinks and for cleaning
clogged printheads, you will need to follow a few tips which are mentioned in
this guide. Well, it takes time and effort so we are here with the exact tips
to do so.
Use
Printer Regularly
To keep
your printheads clear as well as proper working, you will need to use
your canon printer regularly. Doing this will keep the ink
flow proper and also prevent it from heads drying. Therefore, you will need to
use your printer every few days or once a week so that the printheads remain
moist with fresh ink. If you leave it without using it for a long time then,
the ink will be left on the heads and it gets dried and becomes the reason for
clogging.
Clean
on a Regular Basis
Even
after using your printer on a regular basis or every day, there might be a
chance of a few ink droplets which have dried in the tubing leading from the
cartridges or on the printheads. Use the cleaning cycle of your printer at
least once a month and clear any dried ink that is leftover in the heads. Small
paper bits can get sometimes grabbed inside the printheads and machine also, so
it is advisable to blow some canned air so that the dust or paper blows out
when you clean your printhead constantly.
Storage
Capacity
If you
have chosen to not use your printer for a long time period then, it is
recommended to remove the ink cartridges and after that wrap them gently and
strongly in the plastic wrap to keep them fresh and new for future use. It is
effective in preventing the dripping of ink into the printheads and tubes,
drying as well as causing clogging. Based on your printer, you will be able to
eliminate the printheads to clean or for storage. You will need to check the
manual of your printer or the website of the manufacturer for detail or
extended machine storage.
Turn
Off the Printer
When you
have turned on your printer then, it moves the printheads and then, takes to
the ink to get it ready for usages. If you don’t want to turn off the printer
machine itself then, it can return the presence to its “home” position; the
printheads and ink can clog and dry out. It is advisable to turn the printer
off via a power strip or surge protector. Use the power button so that you can
turn it off for protecting the printheads and ink from drying or damage as
well.
How
to Clean Print Head Manually?
Step 1: You can also clean the print head manually
and for that, you will need to remove the ink tanks and the printer heads.
After that, remove the ink tanks and seal them in a zip lock or other plastic
bag. It is advisable to set them apart and it is recommended to propped
upright. Now, you will need to remove the printer head.
Step 2: Soak the printer head and there
are various recommendations to clean the printer head
Choose a
shallow and small pan and then, lay down a layer or two of paper towels in the
container bottom so that the printer head circuitry protected from damaged
contacts. Heat that up enough bottled/purified water for the paper covering
towels. You also can use a 50/50 combination of distilled water and ammonia.
Heat the microwave combination for about a minute or more. Slowly dispense the
combination or mixture over the paper towels and make sure that you have at
least 1/2” of liquid in the pan bottom.
You can
set the printer head into the container on the top of the towel and you should
see the ink ‘bleeding’ out and move the print head to different spots and shake
it firmly. It will easily dissolve the ink clogs. If the printer head is
clogged roughly then, let it soak for at least 3 to 4 hours or leave it
overnight. You can move it firmly to another spot every hour or more.
Step 3: Use water for flushing Printer
Head
You will
need to hold the unit under a gently running tap (warm water tap) and place
your finger over the tap and generate backpressure so that it allowed you to
squeeze water into all the crevices of the printer head. Conduct this step
unless the water goes clearly
Step 4: Replace the Printer head by
drying it out
It is
recommended to remove the print head and use distilled water to wash it
carefully. Now, shake it dry and then, again set it on folded paper towels to
air dry. Now, insert the printer head and ink tanks again. The printer will
then automatically conduct a “Printer Head Configuration”. If it fails to do so
then, conduct the “Printer Head Alignment” manually via the utility of the
printer. In the end, clean the printer head cycle that is followed by printing
a nozzle pattern so that you can see your progress. Repeat the same if
required.
Follow
the above-given tips to clean your Canon printer print heads on a manual basis
and take care of your printer print heads. Call on Canon Helpline UK in case if you are
facing any issues while doing this.
Source URL:
https://tollfree-helpline-number.com/blog/use-your-canon-printer-regularly-to-avoid-print-head-clogging/
Comments
Post a Comment